The ice manufacturer line to my fridge presently does not have any shutoff valve and I also’d want to include one but i cannot determine what size the connector is

The ice manufacturer line to my fridge presently does not have any shutoff valve and I also’d want to include one but i cannot determine what size the connector is

we bought a 1/4 inch valve because the ice maker connector We have says 1/4 FCM onto it however it failed to fit. It seems a lot more like 1/8 inches, however a 1/8 inches valve does not fit either, even though it is quite near. Where could I find details about water pipe sizes, there should be some standard?

The copper water line i will be linking it to gets the exact measurement that is same the refrigerator.


Okay I was thinking that looking the web for 1/4″ OD Valve Male Female would get me personally the things I require but i will be getting no total outcomes therefore I’ve reopened issue! Can anybody provide me personally an internet url to a item that may fit? I have added a photograph for the present connection where let me include the valve. Many Many Thanks!

3 Responses 3

You can find various criteria to pipelines and threads. Your problem is the fact that you want to mix two various standards that are threaded.

The ball valve which you associated with has nationwide pipeline threads (NPT). NPT are tapered and it also is the fact that taper that produces the seal between a female and male joint. No washers are expected.

What exactly is shown in your picture is compression fixtures that have a right or operating thread. The seal is created by either a ferrule or perhaps a plastic washer.

For you personally, the text between your copper pipe while the supply hose happens to be made the following:

1/4″ Copper Tube > 1/4″ Compression by 1/4″ Compression Coupling > 1/4″ Supply Hose

The seal on a ferrule makes the copper tube this is certainly positioned beneath the nut. Due to the fact nut is tightened, the ferrule is compressed involving the coupling and also the pipeline.

The seal on the supply hose part is created with a plastic washer which can be frequently integral the the nut regarding the supply hose. (The compression coupling might have include two pea pea pea nuts, certainly one of which was discarded because the supply hose has one integral.)

Therefore, to respond to your concern, you simply require a 1/4″ compression x 1/4″ compression valve that may change the present coupling. Let me reveal a web link to this type of valve.

Do the paperwork is had by you that included the refrigerator? It will show the ice maker install and maybe state the scale associated with the valve. I’ve constantly seen that it is 1/4″.

Where may be the water line tapped from? Often it comes down a 1/2″ copper pipeline. You might place your valve regarding the copper pipeline part.

EDIT: web web web web Page 33 associated with installation manual states that the water supply tube is 1/4″ OD. you will need a 1/4″ valve. Be certain there are not any burrs regarding the copper tubing after you cut it. Often you’ll want to register the sides. In the event that pipeline cutter just isn’t razor- razor- razor- sharp it may mushroom the ends and which will make it appear that it’s perhaps maybe maybe not the diameter that is right.

On it, preferably set in the wall in plastic box if you have more time and money, the best thing is to run either a 1/2 inch copper line or a 1/2 galvanized line to the back of your refrigerator with a 1/4 inch connection. An alternative cheaper method would be to run a 1/4 inches line through the 1/4 inch connection at your double shut off valve under your drain. However, the copper line is just a hard line and it gets crimped specially when you or another person is careless in moving the refrigerator around to completely clean or any.

Utilizing two crescent wrenches, some tips about what to complete in the event that you currently have a difficult copper line to your straight straight straight back without a shut down valve anywhere in web site. You can purchase a kit with the right components you need, 1/4 inches connectors by having a 6 base, 1/4 inches supply hose, who has the 1/4 pea pea pea nuts foreign brides on both ends. Carefully take action your self or obtain a plumber to slice the copper line by having a copper pipeline cutter, a good clean cut, a number of ins this part of in which the line is released of wall surface or case (provided that it is not crimped, you are ok to cut it).

Place the free 1/4 inches nut on backwards in the pipeline, so that the nut covers the ferrel tucked in during the side of the end associated with the pipe, then, screw in the 1/4 inches connector/adjuster into it, aided by the 1/4 inches threads to your 1/4 inches nut regarding the hose, and tighten up, snug, never ever overbearing, ever with any plumbing system. Then link one other end of hose/nut towards the threaded end on the ice box in the bottom, snug! Remember! Nonetheless, a very important thing to complete anytime you are linking a line to either a tap or fridge or in any case can be, it on to clear the line of air and grub, because who knows how long it’s been sitting before you put that last connection on the refrigerator, put that end in a big bucket and turn. Plus, if you atmosphere into the lines, that is a entire nother hassle, trust in me that you don’t desire! Have the atmosphere away! You can certainly do all this your self too! Do not forget to check always every thing for leakages! Best of luck! Now get commemorate you merely conserved your self $150.

Categories: international mail order brides


Your email address will not be published. Required fields are marked *